Skip to main content
Hot Rolled Coils
Width 750 mm – 2000 mm
Thickness 1.60 mm – 20.00 mm
Coil Weight 28 MT (max)
Specific Coil Wt 18 Kg. / mm max
Coil Dia ID – 762mm; OD – 2000 mm
Length 2000 – 9000 mm
Oiling Parameter Conventional/Electrostatic method of oiling
Packing As per customer specification
Quality API Grades – Non sour application including API Grades (API 5L Gr.B, API 5LX-42 & 46, API 5LX-52, 56, API 5LX-60, API 5LX-65, API 5LX-70, API 5L Gr.B – With Vanadium, API 5CT N80). Sour application (Gr.B, X-42, 46, 52, 56 & 60)
Cold Rolled Coils
Width 100 mm – 1700 mm
Thickness 0.14 mm – 3.15 mm
Coil Weight 25 MT (max.) or 5MT to 8MT
Surface Finish Super Bright, Bright, Matte, Dull
Finishing Facilities Slitting
Cut to length Upto 4500 with tolerance of +2/ -0 mm
Packing Packed in polythene Sheet/HDPE, Wax/VCI paper, metal covers and edge protection
Quality In various internationally well known standards including JIS, BIS, ASTM, EURONORM
Grades ST-42, ST-45, ST-52, SAP-400/410 C-30, C-40, MC-11, EN-8 for spring steel application, C-55, MC-12, EN-9, C-62, C-60, C-80, HC-14, EN-42J
Galvanised Coils & Sheets
Width 600 mm – 1370 mm
Thickness (BMT) 0.14 mm – 3.175 mm
Length 1000 – 3500 mm
Zinc Coating 80 – 600 GSM
Surface Finish Regular spangle
Minimised Spangle, Zero Spangle
Finishing Facilities Skin Pass, tension Leveler, Corrugation
Packing – Coils Packed with HDPE, Wax/VCI paper with metal covers. Coil ID & OD is covered with dual protection of one card board ring & one metal ring.
Packing – Sheets Packed with HDPE and Wax paper with metal covers on wooden pallets.
Quality In various internationally well known standards including ASTM, Euronorm, JIS, DIN etc.
Grades Soft Commercial Lock Forming, Soft Drawing and Structural
Galvanised Coils & Sheets
Width 150 mm – 1370 mm
Thickness (BMT) 0.14 mm – 3.175 mm
Length 1000 – 3500 mm
Zinc Coating 80 – 600 GSM
Surface Finish Regular spangleRegular spangle Minimised Spangle, Zero Spangle
Finishing Facilities Skin Pass, tension Leveler, Corrugation
Packing – Coils Packed with HDPE, Wax/VCI paper with metal covers. Coil ID & OD is covered with dual protection of one card board ring & one metal ring.
Packing – Sheets Packed with HDPE and Wax paper with metal covers on wooden pallets.
Quality In various internationally well known standards including ASTM, Euronorm, JIS, DIN etc.
Grades Soft Commercial Lock Forming, Soft Drawing and Structural
Number of Corrugn 8 / 10 / 11
Packing Coils Are packed with HDPE, Wax/VCI paper with metal covers. Coil ID & OD is covered with dual protection of one card board ring & one metal ring.
Packing Sheets Packed with HDPE and Wax paper with metal covers on wooden pallets.
Galvanised– Hard Quality (Coils & Corrugated Sheets)
Width 760 – 1250 mm
Thickness 0.16- 1.25 mm
Length 100 – 275 GR/M2
Surface Quality Specification JIS G3302 SGCHSpangles – Normal Surface Treatment – Chromated / Dry
Sheet Length 1800 – 4800 mm
Quality JIS G 3302 SGCH, JIS 3316, ESCD7.001, ESCD7.026
CORRUGATED SHEETS
Effective Width 665 – 875 mm
Pitch 76.2 mm
Depth 17.6 / 18 mm
No. of Corrugn 8 / 10 / 11
Packing Coils Are packed with HDPE, Wax/VCI paper with metal covers. Coil ID & OD is covered with dual protection of one card board ring & one metal ring.
Packing Sheets Packed with HDPE and Wax paper with metal covers on wooden pallets.
Pre Painted Galvanised Coil
Width 600 – 1260 mm
Thickness 0.20 – 1.0 mm
Coil Weight 3 – 10 MT
Zinc Coating 90 GR/M2 – 275 GR/M2
Coil ID. 508 mm.
Quality Base Metal – Galvanised Steel As Per EN 10142.
Top Coat – Polyester 25 Microns (5 Microns of Epoxy Primer Plus 20 Microns Polyester Coating)
Back Coat – 5-7 micron
Colour As Per RAL No. or Samples, to be provided by the customer, for colour matching.
Galvalume
Width 600 mm to 1250mm
Thickness 0.20 mm to 1.5 mm
Chemical composition (Coating) 55% Al-Zn alloy with 1.6 % Si
Grade designation Gr.33/ Gr 50/ Gr 80/CS types (A, B )
% Elongation As per ASTM std
Coating mass gms/m2 Coating class 70 to 165 AZM 150/165 as per ASTM std
% Elongation As per ASTM std
Coating mass gms/m2 Coating class 70 to 165
AZM 150/165 as per ASTM std
Surface condition/treatment Spangle skin passed- Surface Chrome Passivated & oiled/Resin coated Surface treatment chemicals from M/s Henkel Chembond.
Reference standard ASTM A 792/A 792M / ASTM A653
Other ref: standards En 10326/En 10327, AS 1397, JIS G 3321
Hot Rolled Plates
Width 800 mm – 4000 mm
Thickness 8 mm – 150 mm
Length 2440 – 12000mm
Shearing (Transverse cutting)
< – 40 mm thickness Sheared Condition
>-40 mm thickness Gas cut condition
Packing Generally supplied in loose condition For specific requirement can be done by box strapping on wooden edge
Billets
SIZE 100 mm x 100 mm
120 mm x 120 mm
125 mm x 125 mm
130 mm x 130 mm
150 mm x 150 mm
165 mm x 165 mm
Length 6mtrs – 12mtrs
Packing 6-12 meters long continuous cast billets are packed in bundles of 4-10 MT weight.
Blooms (As Cast)
Rectangular 285mm x 390mm and 280mm x 320mm
Rounds 160mm , 200mm, 220mm, 255mm, 300mm, 305mm diameter
Square 200mm X 200mm
220mm X 220mm
250mm X 250mm
De-Formed Bars
Grade BS-4449 Grade 460B equivalent
Diameter 6 – 40 mm
Length 12mtrs
Packing Bundles of 2.5MT
   
Wire Roads
Grade SAE 1006/ SAE 1008/ SAE 1010/ SAE 1015/ C-40/ C-45/ C-50 / C-55/ C-60/ C-65/ C-70/ C-75/ C-80/ 10B21/ 15B2JA/ 4140
Diameter 5.5 mm – 25 mm
Coil Weight 1.5MT/ 2MT/ 2.5MT
Special & Alloy Steel >> Rounds
Grade C45/ EN9/ EN8D/ 16MNCR5/ SAE 1541/ EN 353 etc
Diameter 100 mm – 300 mm (Hot Rolled) 200mm – 1000MM (Forged & Ultra Sonically Tested).
   
   
Special & Alloy Steel >> Spring Steel Flats
Grade Silico Manganese Steel, Chrome Vanadium, Chrome Nickel-Vanadium and Chrome Moly- Vanadium.
Width 50mm – 120 mm
Thickness 5 mm – 26 mm
   
Slabs
Thickness From 170 mm – 320 mm
Length 6 – 12 mtrs
Quality In various Internationally well known standards including AISI, SAE, DIN, ASTM, JIS, GOST, BS, BIS etc.
   
Electrical Steel Coils / Sheets
Width Min: 100mm; Std: 1000mm; Max: 1200mm
Thickness 0.50 – 0.65 mm (Std.)
Coil Weight 10 MT Max
TYPE OF COATING  
As Per AISI C3 Alkyd Polyester Resin – C3 (ML/M)
As Per AISI C6 Modified Phenolic Resin – C3 (Y)
As Per AISI C6 Modified Pigmented Poly Resin – C6 (A)
As Per AISI C5 Polyacrylo Nitrile Resin (Chromate Base) – C6 (A)
Coating Thickness (micron) C3 (ML) : 1.5 +/-0.5
(Micron) C3 (M) : 3.0 +/-0.5
C3 (Y) : 4.5 +/-1.5
C6 (A) : 7.0 +/-1.5
C6 (W) : 0.6 +/-0.3
Packing The material is first wrapped in stretch film over card board protectors in the eye and OD edges followed by an additional layer of air-bubble polythene type covering. It is then packed in galvanised sheet metal envelope. Metallic collars are provided in the eye of the coil and on the OD to prevent handling damages. The envelope with strapped with 4 eye and 3 to 4 circumferential straps of special steel. Additional support is provided when warranted. No metallic packing is given on slit coil.